Intellinet 509060 Uživatelský manuál

1-Port USBWireleSSPrint Server USermanUal MODEL 509060 INT-509060-UM-0508-01

3.2 Administrator Installation and SetupThe Administrator Installation can be performed on Windows 98SE/Me/NT/2000/XP/Server 2003/Vista with the same

Select the components you want to install. It is highly recommended that you install all of the provided components. Click “Next” to continue.Specify

At this point, the installation phase is complete. You canprepare to congure the print server. The “Choose Print Server” eld will list all print se

The conguration summary is displayed.Now, you have completed the print server setup. Click Finish” and your system will add a network port of the pr

Uninstall – This “assistant” serves to remove all installed administrator software.3.4 Client Installation and SetupThe Client Installation p

Click “Next” to install the utilities in the default folder, or click “Browse” to specify the destination folder where you would like to install the u

Now that the installation procedure is complete, you are ready to set up the client’s computer. All network ports of the print servers detected on the

3.5.1 Network Ports Quick SetupThe Network Ports Quick Setup utility offers a very simple method to add or remove the print server’s printer port fro

1. Run the Remote Ports utility. Click “Add” to add a remote printer port.2. Enter the print server’s name and IP address, select the ports used

3.6 Windows Add Printer ProcedureAfter adding a network port of the print server to your PC using the Administrator or Client Installation program, y

5. Select the printer manufacturer and the printer model and click “Next.” If your printer isn’t on the list, click “Have Disk…” to install

8. It is recommended that you print a test page. Then click “Finish.”9. The printer is added to the Printers screen, indicating that you have adde

3.6.2 Windows XP1. On the desktop, go to Start, then Settings: select “Printers and Faxes.”2. Click “Add a Printer.”3. The Add Printer Wizard” scree

6. Select a suitable printer manufacturer and the printer model and click “Next.” If your printer isn’t on the list, click “Have Disk…” to i

9. You have now successfully added the printer to the PC. Information about the printer is displayed on screen. Click “Finish.”4. WindoWS nt/2

If your network has already installed a working print server and your Windows NT/2000/Server 2003 has not yet installed the PTPP driver, install t

5. netWare netWork5.1 System ArchitectureA NetWare printer sharing functionality has been integrated into the 1-Port USB Wireless Print Server itsel

6. You’ve now successfully created the print queue that your print server will serve. Press the Escape key until the Available Options mai

6. UniX SyStem netWork6.1 IntroductionThe print server is available for TCP/IP printing by Unix LPD (Line Printer Daemon) protocol. The LPD protocol

1. Optionally, assign a name corresponding to the print server’s IP address. You can add this address to the /etc/hosts le by adding a line such as

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ 1-Port USB Wireless Print Server, Model 509060. Designed to work with any access point or p

mkdir /var/spool/lpd/pserverd chown daemon /var/spool/lpd/pserverd chgrp daemon /var/spool/lpd/ps

7.2 Search for All Available Print Servers Whenever you run the print server’s conguration utility, click on the Search icon (left)

7.3 Status of the Print Server Click on the Status icon (left) on the tool bar to show the status of the current selected print serve

7.4 Set Up the Print Server Click on the Setup icon on the tool bar to show the setup items of the current selected print server on th

7.5 General CongurationDouble-click on the General icon and the General conguration screen will display. You can see basic print server informati

If “Auto” is selected, the DHCP server of the print server will be enabled only when there is no other DHCP server within the network. When “Enable” o

7.9 Bonjour CongurationBonjour enables automatic discovery of computers, devices and services on an IP network. The service name will be seen by use

7.12 System CongurationDouble-click on the System icon and the System conguration window will display.On the System conguration screen, you can en

If you manually disable the wireless function, the print server’s wireless LAN will bealways disabled and Ethernet will be always enabled. You also ca

Double-click on the Wireless icon and the wireless conguration window will display.If you use access points to create a wireless network, Infrastruct

contentS1. INTRODUCTION... ... 6 1.1

This print server supports WEP, WPA-PSK and WPA2-PSK security modes. To use WEP encryption to protect your wireless network, select “WEP(ASCII)” or “

Enter four key values using the guidelines below and select one key as the default key.PassPhrase: A passphrase simplies the WEP encryption process b

TKIP: The Temporal Key Integrity Protocol (TKIP) changes the temporal key every 10,000 packets. This ensures much greater security than standard WEP s

Click “Save” to save the wireless conguration.7.14 Wizard Click on the Wizard icon (left) on the tool bar to display the setup wizard item

1. Set up the name of this print server and the port name for the print server, and choose to enable or disable the wireless function. 2

4. Set up the NetWare printing (refer to section 7.7 for details).5. Select the Wireless Adapter mode and complete the wireless LAN settings

7.15 Report Click on the Report icon (left) on the tool bar to display the Report screen. The report lists basic information

8.3 Device Status8.3.1 SystemSystem Information includes the device name, print server name, model type, system up time, rmware version, MAC addres

8.3.3 TCP/IPThis screen lists all TCP/IP settings of the print server, including the IP address, subnet mask and gateway. It also lists DHCP server s

8.3.5 SNMPThis screen lists the SNMP settings of the print server, including the SNMP system contact and SNMP system location.SNMP System Community:

7.14 Wizard...43 7.15 Rep

8.3.7 AppleTalkThis screen lists AppleTalk settings, including the AppleTalk zone name and the type of printers connected to all print ports.8.3.8 B

8.4 Setup Wizard8.4.1 SystemYou can change the print server name and port name of the print server from here.Print Server Name is the name of the pr

Name is the administrator name of the print server. If you change the name, you need to log in to the print server from the administrator utility or W

stations and access points in the same WLAN network is the same.Channel Number is the channel number of your wireless LAN. The channel number is set t

8.4.2.2 EncryptionThis print server supports WEP, WPA-PSK and WPA2-PSK security modes. To use WEP encryption to protect your wireless network, select

WPA-PSK Security Mode“WPA-PSK” requires that you select one of the advanced encryption methods — TKIP or AES — and enter a set of shared keys.TKIP: Th

WPA2-PSK Security Mode“WPA2-PSK” requires that you enter shared keys with AES algorithms only.AES: AES has been developed to ensure the highest degree

You can congure the print server to automatically get an IP address from the DHCP server, or to manually specify a static IP address. The print serve

8.4.5 SNMPThe print server supports SNMP conguration. If it’s enabled, set up the following parameters.SNMP System Contact: You can enter the print

periodically polls the NetWare server printer queues for printing jobs. You have to assign the NetWare server name, print server polling interval and

1. introdUction1.1 Network Printing ArchitectureBy rst introducing the roles of a print server, client user and network server in the network-prin

8.4.8 BonjourBonjour enables automatic discovery of computers, devices and services on an IP network. The service name will be seen by users on the I

8.5 System Tools8.5.1 Load DefaultYou can use this screen to restore the factory default settings. All of your previous setup will be cleared.8.5.2

8.5.3 Backup SettingsTo back up the print server settings to a “cong.bin” le, select “Backup settings from Print Server.” 8.5.4 Restore SystemTo a

8.5.5 LanguageTo apply the language you want to use, select “TW” for Chinese or “EN” for English; then click “OK.”.9. telnet management9.1 Introduc

9.3 Get Setting Values – The ‘get’ CommandThe “get” command (formatted as: get argument [value] — see the table below) is used to get the setting val

submaskSubnet mask of the print server admin# get submaskSUBNET_MASK=’255.255.255.0’pollingPolling interval (in second) of the print server for waitin

9.4 Modify Setting Values – The ‘set’ CommandThe “set” command (formatted as: set argument [name value] — see the table below) is used to modify the

pollingPolling interval (in second) of the print server for waiting printing jobs on the NetWare serverset polling 3aq1Name of the printer queue on th

10. iPP Printing10.1 IntroductionIPP (Internet Printing Protocol) printing provides a convenient way of remote printing by TCP/IP. The print server

5. Select “Connect to a printer on the Internet or on a home or ofce network” and enter the URL of the print server (the format is “http:/

In the client installation procedure, after the PTPP driver is installed in Windows, the system will automatically (manual conguration is also allowe

8. The printer information displays, indicating that the process is complete. Click “Finish.”11. WindoWS XP SP2 SetUPIn Windows XP SP2, the serv

3. Click on the Advanced tab and click “Settings….”4. Click on the Exceptions tab and click “Add Program….”71XP SP2

5. Click “Browse” to add a new program.6. Open the “NPUtil” le from “C:\Program Files\ PrintServer Utilities” (where C:\ is the system drive

7. If “Network Ports Quick Setup” is displayed in the list, click “OK.”8. The procedure is complete: The Windows XP SP2 will allow the incoming

12. SPecificationSGeneral• CPU: MIPS CPU (240 MHz)• Flash: 2 MB NOR Flash• RAM: 16 MB SDRAM• Printer port: USB 2.0 type A x 1• LAN port: 10

INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or

1.2 Network Printing EnvironmentIn a Windows peer-to-peer network, the client’s PTPP driver will use the TCP/IP protocol to print through the print s

2. hardWare inStallation1. Unpack the 1-Port USB Wireless Print Server package and verify that all the items listed in the Package Contents section