Intellinet 3-Port Print Server Uživatelský manuál stáhnout pdf (Strana 20)

2. Hardware Installation

1. Unpack the print server package and verify that all

the items listed in the section 1.2 are provided.

2. Connect the print server to the printer you want to

share on the network.

3. Connect the print server to your network by attached

the network cable to the UTP port of the print server.

4. Connect the power adapter to the print server. The

print server will perform the Power-On-Self-Test (POST)

after it is powered on. During the POST, the three Printer

Port LEDs will be on. When the LEDs are unlighted, the

print server is ready.

NOTE1: MUST use the power adapter shipped with the print

server, do NOT use any other power adapter from any

sources.

NOTE2: To prevent the compatibility problem between print

server and a few printer, it is recommended that you

power on the print server before the printer.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 152 153

Žádné komentáře

Intellinet 3-Port Print Server Uživatelský manuál Strana 20